+44 (0)843 277 7770
info@medicalcoldchainboxes.com
Home
Cold Chain Products
Data Loggers
Accessories
Contact Us
Data Logger BTH04
Technical Information
Logging status indication via red/green LED and battery status indication via yellow LED
Start logging method: Immediately, Button, Delayed
Can input two point calibration value for each channel when setup
Dew point calculated via software DGraphTM
LCD: Memory Capacity 64KBytes(Total 32,000 readings for all channels)
Sample Rate: Can be selected from 10 seconds to 12 hours
Stop Method: Stop when memory full, overwrite when memory full, stop by button, and stop until specified number of sample points finished
Sample Mode: Instant(default), average, maximum and minimum
This will decide how to dispose data at idle time between a sample interval
Button: Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold
LED: Red&green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished) (Sofware can disable this two LED for saving power)
Yellow LED: Low battery indication
Alarm: User programmable high or low alarm limit for each channel(If necessary)
LED alarm and hold
PC Software: DGraphTM software and USB driver required (Included on CD)
(Compatible with Windows XP, Windows Vista, Windows 7&8(32 bit & 64bit Versions)
Use the software to setup, download, view graph and analyse data
Power Supply: Replaceable 1/2AA 3.6V Lithium Battery 1200mAh(included)
NOTE: USB interface can supply power directly if necessary
Technical Data Sheet
order now
back to products